Kinze 4900 Front Folding Planter Rev. 5/14 - Manual (Page 92)

M0247-01 Model 4900
6-10 Rev. 5/14
TM
Lubrication and Maintenance
• Maintain proper tire pressure. Inflating a tire above or below the recommended pressure can cause tire damage.
• Mount tires only by properly trained personnel using proper equipment.
• Replace tires with cuts or bubbles. Replace damaged rims. Replace missing lug bolts and nuts.
• Do not weld or heat wheel assembly. Heating increases tire pressure.
Do not exceed following maximum pressures:
• Rims stamped with “224”: 75 psi (517.1 kPa) maximum pressure.
• Rims stamped with “276”: 100 psi (689.4 kPa) maximum pressure.
TIRE PRESSURE
WARNING
Over-inflation of tires can result in explosive separation of rim and tire
and cause death or serious injury. Different size rims are designed for
different tire pressures. Inflate to correct pressure for specific rim size.
TRANSPORT TIRES
INFLATION SPECIFICATIONS
WARNING
Explosive separation of rim and tire can cause death or serious injury.
Overinflation, rim and tire servicing, improper use of rims and tires,
worn, or improperly maintained tires could result in a tire explosion.
Tire Locations (L.H. mirrors R.H. shown)
• Wing - 12R and 16R: 7.5" x 20" - 40 psi (275.7 kPa), 24R: 41" x 11" - 60 psi (413.6 kPa)
• Transport - 12R: 255-70R, 22.5 - 100 psi (689.4 kPa) 16R and 24R: 41" x 11" - 75 psi (517.1 kPa)
• Contact drive - 4.80" x 8" - 50 psi (344.7 kPa)
• Row marker - 16" x 6.5" x 8" - 14 psi (96.5 kPa)
Liquid fertilizer piston pump (Not shown) - 4.10" x 6" - 50 psi (344.7 kPa)
Row marker
Wing
Transport