Row unit mounted no till coulter, Coulter or row unit mounted residue wheels, Row unit mounted no till coulter -16 – Kinze 4900 Front Folding Planter Rev. 5/14 User Manual
Page 98: Coulter or row unit mounted residue wheels -16
M0247-01
Model 4900
6-16
Rev. 5/14
TM
Lubrication and Maintenance
ROW UNIT MOUNTED NO TILL COULTER
Check nuts and hardware periodically for proper torque. Be sure
coulter is positioned square with row unit and aligned in front of
row unit disc opener.
NOTE: Torque ⅝" spindle hardware to 120 ft-lb (162 N-m).
Coulter blade can be adjusted to one of four settings. Initially
blade is set in highest position. As blade wears it can be
adjusted to one of three lower settings. See
in Row Unit Operation section of
this manual.
Replace 16" diameter coulter blade when worn to 14½".
Row Unit Mounted No Till Coulter
COULTER OR ROW UNIT MOUNTED RESIDUE WHEELS
Coulter Mounted Residue Wheels
Wheel hubs are equipped with sealed bearings. If a bearing sounds or feels rough when wheel is rotated, replace
them.
Row Unit Mounted Residue Wheels
Single wheel
Double wheel