Kinze 4900 Front Folding Planter Rev. 5/14 - Manual (Page 90)

M0247-01 Model 4900
6-8 Rev. 5/14
TM
Lubrication and Maintenance
Clean and grease PTO shaft coupling each time pump
is installed.
Apply coating of high-speed industrial coupling grease,
such as Chevron
® Coupling Grease meeting AGMA
CG-1 and CG-2 Standards to extend shaft spline life.
LIqUID FERTILIzER PISTON PUMP CRANKCASE OIL LEVEL
Check crankcase oil daily and maintain at oil level
check plug. Fill as needed with EP 90 weight gear oil.
Total oil capacity is approximately ¾ pint.
Refer to operator and instruction manual supplied with
pump and flow divider for more information.
Piston Pump Oil Fill and Check Plug Locations
Fill plug Check plug
PTO SHAFT COUPLING
PTO Pump Installed
LIqUID FERTILIzER CENTRIFUGAL PUMP
Pumps are equipped with factory lubricated bearings
and seals and require no further maintenance.
Neutralize chemicals and flush pump afer each use to
prevent corrosion.
Refer to operator and instruction manual supplied with
pump for more information.
Centrifugal Pump