Leica Biosystems RM2245 - Manual (Page 61)

59 Leica RM2245
2 4
5
6
6. Optional Accessories
6.11 Cold light source
6.12 Fiber-optic light guide
Leica rotary microtome with installed optional
accessories: Magnifier and fiber-optic light guide
Fig. 66
Fig. 68
Fig. 67
• Attach the fiber-optic light guide (2) to the
adapter of the magnifying lens and secure it
in place in the bore (6) using the screw (5).
• Pull off the protective cap (3) from the end of
the fiber-optic light guide and keep it in a safe
place.
• Insert this end into the opening provided (4)
until it engages with a slight click.
• Switch on the Cold light source using the
power switch (7).
• Remove the protective caps (8) and align the
light guide with the specimen.
1
3
7
8
The cold light source may be operated
at the power supply voltage specified
on the identification label (on the under-
side of the instrument) only.
Before use, carefully read the separate-
ly provided Instructions for Use!
• Connect the power cable (1) to the connecting
jack on the rear of the device.
• Plug the power plug into the power socket.
Fig. 69