Lenze ECSDKxxx - Manual (Page 56)

Electrical installation
Power connections
4
l
56 EDKCSDK002 DE/EN/FR 1.1
Shielded cables
Observe the following to increase the effect of shielded cables:
ƒ Good shield connection
– Ensure a contact surface as large as possible
ƒ Low shield resistance
– Only use shields with tin−plated or nickel−plated copper braids (shields
with steel braids cannot be used).
ƒ High overlap rate of the braid
– At least 70 ... 80 % with 90° overlap angle
The shield mounting kit ECSZS000X0B001 contains shield clamps.