MK Diamond MK-660 - Manual (Page 14)

14
PRODUCt sPeCiFiCatiONs
The MK-660 Saw is a versatile Tile Saw. Operated and used according to this manual, the
MK-660 will provide years of dependable service.
GeNeRal DesCRiPtiON
MOtOR sPeCiFiCatiONs
BlaDe CaPaCitY
tile tYPes
The MK-660 Saw is engineered as a tabletop or stand mounted wet tile saw. The saw includes a
powerful 120v electric motor. The saw is capable of cutting tile up to fourteen (14) inches in length.
The saw can cut an object two (2) inches thick in one pass.
Motor specifications for the MK-660 Saw are listed in the table below:
Voltage 120v
Motor Only amperage 8.8 a
Frequency 60Hz
RPM 3500 rpm
Horse Power 3/4 hp
weight 53 lbs.
The MK-660 Saw uses a seven (7) inch (178mm) diameter, wet cutting continuous rim, MK Diamond
blade with a five-eighths (5/8) inch (15.875 mm) arbor.
The MK-660 Saw can cut a variety of tile types including stone, masonry, and lapidary products.
NOte: The MK-660 Saw is not designed to cut plastic or metals.
MK-660 tile saw saFetY