MK Diamond MK-660 User Manual
Page 34
Advertising
34
MK-660 tile saw
tROUBlesHOOtiNG
BlaDe will NOt CUt PROPeRlY
(B)
Check for proper rotation
(A)
Check for Smoothness or
“Glazing" (Dress blade if
needed)
(C)
Ensure the Blade Core is not
bent and Arbor is not out of
round
(D)
Verify the blade is correct for
the material being used
MOVaBle CUttiNG taBle DOes NOt MOVe CORReCtlY
(B)
Check the movable Cutting
Table Roller Wheel for wear
replace if necessary
(A)
Check that the Guide Bar is
clean – clean if dirty
Advertising