MK Diamond MK-660 User Manual
Page 20
20
1. To prevent the possibility of electrical shock, the MK-660 Saw MUST be de-energized
when connecting the Water Pump.
2. To prevent the possibility of electrical shock, use only MK Diamond qualified
replacement parts.
MK-660 tile saw
asseMBlY
(D)
Inspect the Pump Assembly for
damage - ensure the cord is free
of cracks or cuts
(E)
Inspect the MK-660 for dam-
age - ensure the cord is free
of cracks or cuts
CONNeCtiNG tHe wateR PUMP
Prior to beginning work, a pre-start inspection of the saw should be preformed.
waRNiNG
NOte: To prevent pump damage, the Water Pump must be disconnected if cutting with a Dry Blade.
(A)
Connect the Coolant Transfer
Tube to the inlet connection of
the Blade Guard
(B)
Connect the Water Pump power
cord to the connection found on
the back of the motor