MK Diamond MK-660 - Manual (Page 16)

16
tRaNsPORt
The MK-660 Saw is designed with a rigid frame and removable Cutting Head. Always use proper
lifting techniques when lifting the MK-660 Saw.
To lift the saw, grasp the front and back of the frame at the lift points shown below.
1. The MK-660 Saw weighs approximately fifty-three (53) pounds; use care when transporting.
2. Never transport the MK-660 Saw with water in the Water Pan.
CaUtiON
MK-660 tile saw tRaNsPORt
Lift Point
Lift Point
Cutting Head
The MK-660 Saw weighs fifty-three (53) pounds; follow the guidelines in the TRANSPORT
section when placing it on the stand (MK Diamond Part# 151889).
If using the Optional MK Diamond Stand, follow these steps:
staND (Optional)
CaUtiON
(A)
Open the stand and place on
flat surface
(B)
Remove Water Basin,
place saw on stand
(C)
Ensure saw frame is
positioned properly
(D)
Reinstall the Water Basin
NOte: