New Era NE-9000 Series Programmable Peristaltic - Manual (Page 10)

New Era Pump Systems Inc.
www.SyringePump.com
Model NE-9000
Publication #1200-04 2 7/28/14
!
Caution
• Do not transport and store this product where the temperature and the humidity are high or fluctuate
greatly, or the product is subjected to direct sunlight.
• Remove tubing from pump when not in use. Tubing will become deformed changing dispensed volume
per rotation.
• Tubing wall may become permanently damaged if the roller compresses the same part of the tubing for
a long time.
• During installation and use, be careful not to cut yourself on the edge of the Pump parts.
• Tubing life depends upon chemical and operating environment.
• Tubing Chemical compatibility list mentioned is only a guide. The user is responsible to determine the
tubing compatibility to the chemical to be used.
• Keep delivery and suction lines as short as possible, use a minimum number of bends.
• Pump operates best at medium speeds. At very slow speeds pump will get hot. At high speeds pump
and tubing life will decrease, pump will lose force/ pressure and may stall.
• Run at slow speed and use larger diameter tubing when pumping viscous liquid.
• User is responsible to determine the maximum speed the pump can operate.
• Discharge static from control cables before connecting by touching the cable to ground.
• Before touching the pump, discharge static by touching ground.
1.2 Disclaimer
NEW ERA PUMP SYSTEMS INC. makes no representations or warranties, expressed, statutory or
implied, regarding the fitness or merchantability of this product for any particular purpose. Further, NEW
ERA PUMP SYSTEMS INC. is not liable for any damages, including but not limited to, lost profits, lost
savings, or other incidental or consequential damages arising from ownership or use of this product, or for
any delay in the performance of its obligations under the warranty due to causes beyond its control. NEW
ERA PUMP SYSTEMS INC. reserves the right to make any improvements or modifications to the
product described in this manual at any time, without notice.
Design and specifications are subject to change without notice.
The information contained in this document is believed to be correct but NEW ERA PUMP SYSTEMS
INC. accepts no liability for any errors it contains, and reserves the right to modify this document without
notice.
NEW ERA PUMP SYSTEMS INC. products are not designed, intended, or authorized for use in
applications or as system components intended to support or sustain human life, as a clinical medical
device for humans, or for any application in which the failure of the product could create a situation where
personal injury or death may occur.
All brand and product names used in this manual are the trademarks of their respective owners.
1.3 Warranty
NEW ERA PUMP SYSTEMS INC. warranties this product and accessories for a period of two year, parts
and labor, from the date of purchase. The repaired unit will be covered for the period of the remainder of
the original warranty or 90 days, whichever is greater.
The Peristaltic Pump Head Assembly and peristaltic tubing are considered replaceable items and are not
covered under overall product warranty.
A return authorization number must be obtained from NEW ERA PUMP SYSTEMS INC. before
returning a unit for repair. Warranty covered repairs will not be performed without a return authorization
number. At the option of NEW ERA PUMP SYSTEMS INC., a defective unit will be either repaired or
replaced.
This warranty does not cover damage by any cause including, but not limited to, any malfunction, defect
or failure caused by or resulting from unauthorized service or parts, improper maintenance, operation
contrary to furnished instructions, shipping or transit accidents, modifications or repair by the user, harsh
environments, misuse, neglect, abuse, accident, incorrect line voltage, fire, flood, other natural disasters,
or normal wear and tear. Changes or modifications not approved by NEW ERA PUMP SYSTEMS INC.
could void the warranty.
The foregoing is in lieu of all other expressed warranties and NEW ERA PUMP SYSTEMS INC. does not
assume or authorize any party to assume for it any other obligation or liability.