New Era NE-9000 Series Programmable Peristaltic - Manual (Page 9)

New Era Pump Systems Inc.
www.SyringePump.com
Model NE-9000
Publication #1200-04 1 7/28/14
1. General Information
Thank you for purchasing the NE-9000 Programmable Peristaltic Pump. With the NE-9000 peristaltic
pump you will be able to perform simple fluid dispensing or implement a complex automated dispensing
system.
Please familiarize yourself with the NE-9000’s operation by reading this user's manual. For future
reference, record the serial number, located on the rear of the pump, and the date of purchase.
Serial Number ____________________, Date of Purchase ___________________________,
This Operating Manual, and the NE-9000’s hardware, electronics and firmware are copyrighted.
Copyright 1999-2010, all rights reserved.
1.1 Safety
In the interests of safety, this pump and the tubing selected should only be installed and used by
competent, suitably trained personnel after they have read and understood this manual, and considered any
hazards involved.
Markings & Symbols
The following are the meanings of the markings and symbols used in these Safety Precautions.
! Warning This symbol indicates information that, if ignored or applied incorrectly, creates
the possibility of death or serious personal injury. i.e. fire, explosion.
!
Caution This symbol indicates information that, if ignored or applied incorrectly,
possibility of minor or moderate personal injury or property damage.
! Warning
• Read the user’s manual
• This product is designed for liquid only.
• User is responsible to determine the suitability of the pump to its desired function.
• Verify that tubing is appropriate for liquid being pumped.
• Disconnect power from the pump when replacing tubing or connecting or disconnecting cables.
• Never leave any dangerous liquid inside of tubing when replacing tubing and disposing pump. Remaining
liquid may cause serious injury.
• Never use in atmosphere with flammable gas.
• Never use in any location where there is a possibility of high humidity, high temperature, or extreme dust.
• Use only with the supplied power supply connected to a power source as specified on the power supply
label.
• Never use a voltage that is different from voltage specified in this manual. Unless Authorized by NEW
ERA PUMP SYSTEMS INC.
• Do not operate with any foreign matter (water, dirt, metal or other materials) inside the Pump-head.
• Do not push objects of any kind into the chassis openings, except for appropriate cables and connectors.
• Never try to take the unit apart or modify it except as described in this manual or authorized by NEW
ERA PUMP SYSTEMS INC.. No user serviceable parts inside.
• Do not immerse the pump in liquid. If spilling occurs unplug pump immediately.
• Install on a stable surface.
• The pump can automatically start when the Pumping Program is operating or when attached to an
external control device.
• Prevent liquids from entering openings in the rear of the pump.
• If the pump becomes damaged, do not use unless certified safe by a qualified technician. Damage
includes, but is not excluded to, frayed cords and deterioration in performance.