Selecting dispense programs, Learn and repeat – New Era NE-9000 Series Programmable Peristaltic User Manual

Page 3

Advertising
background image

New Era Pump Systems Inc.

www.SyringePump.com

Model NE-9000

Publication #1200-04

ii

7/28/14

Selecting Dispense Programs


Multiple dispense settings can be stored and selected as needed. The last selected dispensing program will
be the default dispense program when the pump is powered on. Up to 40 dispense programs can be
stored.

To view or select the current dispense program number, or to select a different program, press and hold
either the ‘Rate’ or ‘Volume’ key. The display will show:

nn


Where ‘nn’ indicates the currently selected dispense program. Use the up arrow keys to change the
dispense program number. Press ‘LEARN’ to select, or wait for the 5 second time out. The display will
blink when selected.

Press the ‘Start’ key to immediately start the selected dispense.

Press the ‘Rate’ or ‘Volume’ keys to display the settings for the selected dispense. Any changes made to
the pumping rate or dispense volume will be stored in the selected dispense program.

Learn and Repeat

Learn and repeat easily teaches the pump a dispense volume. Then you can immediately repeat this
dispense.

While turning on power, press and hold the ‘LEARN’ key. The display will show:


Press and hold the ‘Start’ key to begin dispensing. As the desired volume is approached, you can release
the key to stop the pump, then periodically press the ‘Start’ key to slowly and accurately approach your
dispense volume.

While pumping, the volume dispensed will be displayed. When the ‘Start’ key is released, the display will
alternate between displaying the volume dispensed and the currently selected dispense setting number.

Press the ‘LEARN’ key, or wait for the time out, to immediately store the dispensed volume in the
currently selected dispense setting. A double beep will sound and the display will show:


Press any key to return to the currently selected dispense program display.
Press ‘Start’ to immediately begin the newly learned dispensed.

The learned dispense can be stored in a different dispense setting number. After the required dispense
volume is reached, press any of the up arrow keys. The display will show:

nn


Where ‘nn’ is the crrently selected dispense setting number. Use the up arrow keys to select a different
location to store the dispense. Press the ‘LEARN’ button or wait for the time out. A double beep will
sound and the display will show:


Press the ‘Start’ button to immediate begin dispensing the learned dispense.

Advertising