Northern Connectors Harting D-sub Connectors, Housings & Accessories - Manual (Page 148)

05
147
D-Sub
9 09 67 002 9001
15 09 67 002 9002
25 09 67 002 9003
09 67 002 9006
09 67 002 9007
9 09 67 002 9055
15 09 67 002 9056
25 09 67 002 9057
9 09 67 002 9050
15 09 67 002 9051
25 09 67 002 9052
9 09 67 002 9065
15 09 67 002 9066
25 09 67 002 9067
9 09 67 002 9060
15 09 67 002 9061
25 09 67 002 9062
4-40 UNC
M3
4-40 UNC
M3
4-40 UNC
M3
6,3
- 0,25
No. of
Identification contacts Part No. Drawing Dimensions in mm
Accessories for IP 67 connectors
Front sealing
rubber 1)
IP 67
Female screw lock
and spacing washer 2)
x
9 16.7
15 24.8
25 38.8
Mounting example
(length of engagement)
Tin plated
1) The front sealing rubber is to be used with hood 09 67 0xx 0436 and 09 67 0xx 0437 when a mated system needs to have the IP 67
performance; in this case, the front sealing rubber is positioned in the IP 67 male connector prior to the mating operation with the facing
IP 67 connector; it provides a full protection of the contacts at the mated area by preventing possible ingress of liquids or dust between
the shells.
Dust cap
for female connectors 3)
for male connectors 4)
3) With inside glued
front sealing rubber
2) Order 2 for each
connector
4) Order separately
the front sealing
rubber for an IP 67
performance
Front sealing
rubber inside
M3 or 4-40 UNC
M3 or 4-40 UNC
a b c d
9 25.00 16.9 30.8 16.4
15 33.30 25.2 39.1 24.7
25 47.04 38.9 53.0 38.5
M3 or 4-40 UNC
M3 or 4-40 UNC
D-Sub
Detail Y (Scale 5:1)
Front sealing rubber
is mounted in male
connector
sealed
IP 67 shielding concept
Detail X (Scale 5:1)
Front seal glued
to shielding dust cap
IP 67 shielding concept