Northern Connectors Harting D-sub Connectors, Housings & Accessories - Manual (Page 168)

05
167
D-Sub
D-Sub InduCom
66 63 009 6016
66 63 009 6004
InduCom 9 – Industrial bus interface system
Identification Part No. General information
CAN Interface The Controller Area Network (CAN)-Interface is specially
designed for usage in trains. With this interface it is
possible to realise a T-bus structure with which you can
disconnect the bus interface from the control unit without
any interruption of the complete bus communication.
On the PCB you will have a load resistor which can be
activated with the switch.*
Components of the interface set:
●
1 metal housing with 2 cable entries
●
2 hexagonal screws with UNC 4-40 threads
●
1 PCB with 9 way D-Sub female connector and
2 cage clamps
●
1 blanking piece
●
2 crimp flanges
●
2 crimp ferrules
Profibus Interface The Profibus Interface is specially designed for usage in
trains and in challenging engineering applications.
On the PCB you will have SMD parts which can be
activated with solder bridges.
The wires are assembled with the proven vibration
resistant cage clamp technology.*
Components of the interface set:
●
1 metal housing with 2 cable entries
●
2 hexagonal screws with UNC 4-40 threads
●
1 PCB with 9 way D-Sub female connector and
2 cage clamps
●
1 blanking piece
Further bus PCBs on request
* To check compatibility with cable types and manufacturers, please contact your local HARTING representative.