Northern Connectors Harting D-sub Connectors, Housings & Accessories - Manual (Page 52)

05
51
D-Sub
D-Sub
Two termination processes are available: crimp or solder
1) Coaxial contacts are provided in two versions:
●
Inner conductor soldered and outer part crimped (solder/crimp termination)
●
Both inner and outer part crimped (crimp/crimp termination); this version is recommended for medium or
large size volume since crimping is faster than soldering.
Connectors for cable applications – general information
Shell
Signal contacts
Power contacts
Coaxial
contacts 1)
High voltage
contacts
Crimp termination
●
For wire gauge: AWG 20-24 or 26-28
●
Plating: 0.76 µm or 0.2 µm Au over Ni
Crimp
●
Rating: 10, 20, 30, 40 A
●
Plating:
Mating side 0.76 µm or 0.2 µm Au
Terminating side 0.2 µm Au
Solder cup
●
Rating: 10, 20, 30, 40 A
●
Plating:
Mating side 0.76 µm or 0.2 µm Au
Terminating side 0.2 µm Au or 5 µm Sn
Solder/crimp termination resp.
Crimp/crimp termination
●
50 or 75 Ω
●
Plating:
Mating side 1.3 µm or 0.2 µm Au
inner conductor
0.76 µm or 0.2 µm Au
outer ring
Terminating side 1.3 µm or 0.2 µm Au
inner conductor
0.2 µm Au or 5 µm Sn
outer ring
Ferrule 0.2 µm Au or 5 µm Sn
●
Cables: RG 178, 179 …
Solder termination
●
Plating:
1.3 µm Au over Ni terminating
and mating side
Pre-mounted solder cup contacts
●
Plating: 0.76 µm or 0.1 µm Au over Ni
Crimp
●
Rating: 10, 20, 30, 40 A
●
Plating:
Mating side 0.76 µm or 0.2 µm Au
Terminating side 0.2 µm Au
Solder cup
●
Rating: 10, 20, 30, 40 A
●
Plating:
Mating side 0.76 µm or 0.2 µm Au
Terminating side 0.2 µm Au or 5 µm Sn
Solder/crimp termination resp.
Crimp/crimp termination
●
50 or 75 Ω
●
Plating:
Mating side 1.3 µm or 0.2 µm Au
inner conductor
0.76 µm or 0.2 µm Au
outer ring
Terminating side 1.3 µm or 0.2 µm Au
inner conductor
0.2 µm Au or 5 µm Sn
outer ring
Ferrule 0.2 µm Au or 5 µm Sn
●
Cables: RG 178, 179 …
Solder termination
●
Plating:
1.3 µm Au over Ni terminating
and mating side