Northern Connectors Harting D-sub Connectors, Housings & Accessories - Manual (Page 77)

05
76
D-Sub
2W2 / 2W2C
3W3 / 3W3C
5W1
5W5
7W2
Male connector* Power contact Coaxial contact
Identification Drawing Dimensions in mm
* When using a female connector with straight pcb contacts the board drilling pattern must be mirrored in the Y axis.
Board drillings for connectors with straight pcb contacts
Pcb hole patterns
In the next pages, the pcb hole pattern is given for the power and the coaxial contact per connector layout.
In the case of the power contact, the drilling hole dimension is not mentioned; the table here under provides
relevant information according to the current rating of the contact and its version.
Power contact diameter and pcb related drilling diameter
Straight connectors Right angled connectors
Rating Pin Ø (mm) Pcb drilling Ø (mm) Pin Ø (mm) Pcb drilling Ø (mm)
20 A 2.60 2.9 2.85 3.15
30 A – – 3.20 3.50
40 A 3.75 4.0 3.75 4.05
D-Sub
DIN 41 652 T1