NTi Audio Minilyzer ML1 - Manual (Page 46)

46
Troubleshooting
5. TroublesHooTING
System Break Down
• Switch the device off.
• Reset the ML1 to the default status by pressing the ESC button
and switching the Minilyzer on simultaneously.
• Release the ESC button.
• The below screenshot, Fig 26, shall appear on the display, stating
on the bottom line LOADING DEFAULT SETUP.
• Verify the correct operation.
Fig 5.1 Start Up Screen Loading Default Setup
In case you find system breakdowns happening several times or your
device is malfunctioning please contact the local NTi Audio representa-
tive in your country. For contact-details please see the NTi Audio web
page: "www.nti-audio.com".
Low Level Measurements
The Minilyzer does automatically
recognize the actual input (XLR
or RCA) in use. To measure low
level audio signals (< 70 dBu)
the balanced input shall be used
only. Unbalanced signals need
to be connected to the XLR-
input via an XLR/RCA-adapter.
Fig 5.2 XLR/RCA Adapter
1
2
3
Hot