NTi Audio Minilyzer ML1 - Manual (Page 9)

9
battery replacement
After unpacking, insert three (3) pcs. 1.5 V alkaline batteries, type AA,
LR6, AM3 into the ML1 battery compartment as shown in Fig 1 and Fig
2. The typical life-time for a set of alkaline batteries is 16 hours.
NOTES • We do not recommend to use rechargeable NiCd- or
NiMH-batteries.
• Do not insert batteries of different types.
• Note the correct polarities of the inserted
batteries.
• Remove the batteries as soon as they are flat and
change all batteries at the same time.
Introduction
Fig 1.1 Open Battery Compartment Fig 1.2 Inserted Batteries