Rockwell Automation 48MS MultiSight Vision Sensor - Manual (Page 43)

MultiSight™ User Manual
Start-up
10000000877(02) 43
Screen Shot Field name Description
Region of Interest (ROI) –
Yellow frame with a
number
Frames: Region of
Interest (ROI - Yellow),
Pattern (Red),
Position (Blue), and
Match (Green)
When a detector is selected (radio buttons in Select
Detector window) its ROI appears as a yellow frame
with a number on the image. The ROI can be selected
by double clicking anywhere inside it. A dot will be
displayed just outside each corner and along each side
to indicate that it is selected. When the ROI frame is
selected, it can be moved by clicking and dragging
inside the frame and it can be resized by placing the
cursor on the side or corner and then clicking and
dragging.
The red pattern frame within the ROI is used to teach
the pattern or contour to be detected. When the Teach
button is clicked, whatever pattern is in the red frame is
taught to the sensor. Double click inside the red frame
to select it and then resize or move it.
In run mode, the green match frame indicates where
the pattern or contour was detected.
The blue frame is the position frame and only appears
when the Position Control parameter is active.
The ROI, pattern, and position frames of non-selected
detectors will appear if the Display Icon check box in
the Select Detector window is checked. They are
greyed out to differentiate them from the currently
selected detector.
Live Display Displays the current live image of the MultiSight and
continuously refreshes the image.
Zoom Magnifies the image with a digital zoom (2:1 ratio).
The ROI and Pattern frames are displayed and can be
adjusted.
Save image Saves the current image as a bitmap file (.bmp) with or
without the ROI, pattern, and position frames.
Max. Pattern Size Select a maximum pattern size of 400 x 160, 160 x 400,
or 248 x 248 pixels.