Rockwell Automation 48MS MultiSight Vision Sensor - Manual (Page 62)

MultiSight™ User Manual
Maintenance
62 10000000877(02)
The save operation for permanent save (Teach permanent) may
take up to 500 ms.
During this period in continuous moving applications, the output
locks to FAIL regardless of the part evaluation (i.e. both “good”
and “bad” parts give a FAIL output). When the Teach Temporary
function is used, the new pattern is stored only in the RAM (this
requires much less time). In this case, the pattern is no longer
available after the MultiSight is reset and must therefore be re-
taught.
IMPORTANT