Rockwell Automation 20-COMM-L LonWorks Adapter User Manual
Page 42
4-10
Configuring the LonWorks Network
20-COMM-L LonWorks Adapter User Manual
Publication 20COMM-UM008B-EN-P
Variable: nvoDrvSpeed
Format: SNVT_level_percent
Explanation:
This network variable output provides the speed of the drive as a percentage
of the nominal speed. This network variable output is also used as a
heartbeat to monitor the health of the LonWorks communication interface.
Default PowerFlex 70/700 Drive Parameter Mapping:
Parameter 1 - [Output Freq]
This can be mapped using the nviNV_config variable.
Variable: nvoDrvPwr
Format: SNVT_power_kilo
Explanation:
This network variable output provides the drive power in kilowatts.
Default PowerFlex 70/700 Drive Parameter Mapping:
Parameter 7 - [Output Power]
This can be mapped using the nviNV_config variable.
Variable: nvoDrvVolt
Format: SNVT_volt
Explanation:
This network variable output provides the drive voltage in volts.
Default PowerFlex 70/700 Drive Parameter Mapping:
Parameter 6 - [Output Voltage]
This can be mapped using the nviNV_config variable.
Drive Speed
Drive Power
Drive Voltage