Chapter 1, Getting started, Components – Rockwell Automation 20-750-PNET Profinet Single Port Option Module User Manual
Page 11
Advertising
Rockwell Automation Publication 750COM-UM006A-EN-P - January 2013
11
Chapter
1
Getting Started
The 20-750-PNET option module is intended for installation into a PowerFlex
750-Series drive and is used for network communication.
Components
Topic
Page
➊
➋
➌
Item
Part
Description
➊
Status Indicators
Three status indicators that
indicate the status of the
option module and network
communication. See
,
.
➋
IP Address
Selection Jumper
Sets the source used for the
network address. See
the IP Address Selection
Jumper on page 20
➌
Port 1 Profinet
Connector
RJ45 connection for a
Profinet cable.
Advertising