Rockwell Automation 20-750-PNET Profinet Single Port Option Module - Manual (Page 68)

68 Rockwell Automation Publication 750COM-UM006A-EN-P - January 2013
Chapter 8 Viewing the Option Module Web Pages
Figure 10 - DOS Window Example Showing E-mail Server IP Address
3. Click Save Changes.
Figure 11 shows an example email message automatically sent by the option
module in response to selected events.
Figure 11 - Example of E-mail Message Sent by the Option Module
IMPORTANT After configuring E-mail Notification, we recommend protecting
the settings. Otherwise the configuration can be changed
anytime the web page is accessed with a browser. To protect the
settings, use Device Parameter 20 - [Web Features] to set E-
mail Cfg Bit 0 value to ‘0’ (Disabled).
TIP To stop email messages, uncheck all of the ‘Send an e-mail message
when…’ boxes.
Disabling the option module web pages by setting Device Parameter 19
- [Web Enable] to ‘0’ (Disabled) will not stop the option module from
sending email messages.