Viewing and clearing events – Rockwell Automation 20-750-PNET Profinet Single Port Option Module User Manual
Page 58
58
Rockwell Automation Publication 750COM-UM006A-EN-P - January 2013
Chapter 7 Troubleshooting
Viewing and Clearing
Events
The option module has an event queue to record significant events that occur in
the operation of the module. When such an event occurs, an entry consisting of
the event's numeric code and a timestamp is put into the event queue. You can
view the event queue with any of these drive configuration tools:
• PowerFlex 20-HIM-A6 or 20-HIM-C6S HIM
• Connected Components Workbench software, version 1.02 or later
• DriveExplorer software, version 6.01 or later
• DriveExecutive software, version 5.01 or later
For details on viewing and clearing events with the HIM, see the PowerFlex 20-
HIM-A6/-C6S HIM (Human Interface Module) User Manual,
publication
.
The event queue can contain up to 32 entries, which are stored in an EEPROM
chip—making the event queue nonvolatile. Eventually the event queue will
become full, since its contents are retained through option module power cycles
and resets. At that point, a new entry replaces the oldest entry. Only an event
queue clear operation or the corruption of the EEPROM group containing the
event queue will clear the event queue contents. In the latter case, the option
module will not generate a fault to indicate that the event queue was corrupted.
80
IP Addr Act 1
Value of each byte in the option module’s present IP address. A value of ‘0’ appears if the option module does not
currently have an IP address.
81
IP Addr Act 2
82
IP Addr Act 3
83
IP Addr Act 4
84
Subnet Act 1
Value of each byte in the option module’s present subnet mask. A value of ‘0’ appears if the option module does not
currently have a subnet mask.
85
Subnet Act 2
86
Subnet Act 3
87
Subnet Act 4
88
Gateway Act 1
Value of each byte in the option module's present gateway address. A value of ‘0’ appears if the option module does
not currently have a gateway address.
89
Gateway Act 2
90
Gateway Act 3
91
Gateway Act 4
Table 4 - Option Module Diagnostic Items (Continued)
No.
Name
Description
255.255.255.255
[IP Addr Act 1]
[IP Addr Act 2]
[IP Addr Act 3]
[IP Addr Act 4]
255.255.255.255
[Subnet Act 1]
[Subnet Act 2]
[Subnet Act 3]
[Subnet Act 4]
255.255.255.255
[Gateway Act 1]
[Gateway Act 2]
[Gateway Act 3]
[Gateway Act 4]