Appendix b, Option module parameters, Parameter types – Rockwell Automation 20-750-PNET Profinet Single Port Option Module User Manual
Page 75
Rockwell Automation Publication 750COM-UM006A-EN-P - January 2013
75
Appendix
B
Option Module Parameters
This appendix provides information about the option module parameters.
Parameter Types
The option module has two types of parameters:
• Device parameters are used to configure the option module to operate on
the network.
• Host parameters are used to configure the option module Datalink transfer
and various fault actions with the drive.
You can view option module
Device parameters and Host parameters with any of
the following drive configuration tools:
• PowerFlex 20-HIM-A6 or 20-HIM-C6S HIM—use the
or
key to scroll to the drive port in which the module resides, press the
(Folders) key, and use the
or
key to scroll to the DEV PARAM
or HOST PARAM folder.
• Connected Components Workbench software—click the tab for the
option module at the bottom of the window, click the Parameters icon in
the tool bar, and click the
Device or Host Parameters tab.
• DriveExplorer software—find the option module in the treeview and open
its Parameters folder.
• DriveExecutive software—find the option module in the treeview, expand
the module in the tree, and open its Parameters folder.
Topic
Page