Rockwell Automation 21G PowerFlex 755 Transition Section and Splicing Kit - Manual (Page 11)

Rockwell Automation Publication 750-IN027C-EN-P - November 2013 11
PowerFlex 755 Transition Section and Splicing Kit for Floor-mount Drives and CENTERLINE 2100 Motor Control Centers
6. Make sure cabinets are level and pushed together tightly.
7. Tighten the screws in a uniform pattern.
IMPORTANT Do not use hardware to draw cabinets together.
1/4-20
6.2 N•m (55 lb•in)
10 mm