Rockwell Automation 21G PowerFlex 755 Transition Section and Splicing Kit - Manual (Page 7)

Rockwell Automation Publication 750-IN027C-EN-P - November 2013 7
PowerFlex 755 Transition Section and Splicing Kit for Floor-mount Drives and CENTERLINE 2100 Motor Control Centers
Left-side Kit Assembly Step 3 (Left): Join Transition Section to Left Side of Drive Cabinet
1. Remove panels from the left side of the PowerFlex 755 drive cabinet.
2. Align the left transition section with the drive cabinet.
No. Description
➊
Top and bottom rear-wireway panels.
➋
Top and bottom PE bus-bar access panels.
➌
Main horizontal bus-bar access panel.
➊
➊
➋
➋
➌
Cabinet door and internal components
omitted for clarity.
➊
➊
➊
➊
➊
➊
➊
➊