Rockwell Automation 21G PowerFlex 755 Transition Section and Splicing Kit - Manual (Page 2)

2 Rockwell Automation Publication 750-IN027C-EN-P - November 2013
PowerFlex 755 Transition Section and Splicing Kit for Floor-mount Drives and CENTERLINE 2100 Motor Control Centers
Additional Resources The following table lists publications that provide general PowerFlex 755 drives
and CENTERLINE 2100 MCC related information.
You can view or download publications at
http://www.rockwellautomation.com/literature/ .
To order paper copies of technical documentation, contact your local Allen-
Bradley distributor or Rockwell Automation sales representative.
What the Kits Contain A complete installation requires one transition section and one bus bar splicing
kit. Depending on the catalog number ordered, the kit will be a left-side mount or
a right-side mount relative to the drive. Kits include all joining and splicing
hardware. An IP20, NEMA/UL Type 1 enclosure results when kits are installed
according to these instructions. If a NEMA Type 12 structure is required, follow
the CENTERLINE Motor Control Centers NEMA Type 12 Sealing
Instructions, publication
2100-IN037 .
Resource Description
PowerFlex 750-Series AC Drives Installation Instructions,
publication
750-IN001
Provides detailed information on:
• Installation requirements
• Additional safety requirements
• Drive assembly removal and handling
• Approximate dimensions
CENTERLINE 2100 Low Voltage Motor Control Centers
Installation Instructions, publication
2100-IN012
Provides detailed information on:
• Installation requirements
• Handling instructions
• Approximate dimensions
CENTERLINE Motor Control Centers NEMA Type 12 Sealing
Instructions, publication
2100-IN037
Provides detailed information on:
• Sealing NEMA Type 12 structures
Left-side Kits Right-side Kits Amp
Rating MCC Bus Bar Position Mounting
Channel
20-750-XBUS-LHNB-1200 20-750-XBUS-RHNB-1200 1200 Standard (15 and 20 in. deep) For use
with MCCs
that have
1.5 inch
mounting
channels.
20-750-XBUS-LHNB-2000 20-750-XBUS-RHNB-2000 2000 Standard (15 and 20 in. deep)
20-750-XBUS-LHNB-3000 20-750-XBUS-RHNB-3000 3000 Standard (15 and 20 in. deep)
20-750-XBUS-LHBB-1200 20-750-XBUS-RHBB-1200 1200 Bumped Back (20 in. deep)
20-750-XBUS-LHBB-2000 20-750-XBUS-RHBB-2000 2000 Bumped Back (20 in. deep)
20-750-XBUS-LHBB-3000 20-750-XBUS-RHBB-3000 3000 Bumped Back (20 in. deep)
20-750-XSEC-LH-20G
(1)
(1) Hardware is included to install the optional 1.5 mounting channel.
20-750-XSEC-RH-20G
(1)
N/A 20 in. deep transition section N/A
20-750-XBUS-LLNB-1200 20-750-XBUS-RLNB-1200 1200 Standard (15 and 20 in. deep) For use
with MCCs
that do not
have
mounting
channels.
20-750-XBUS-LLNB-2000 20-750-XBUS-RLNB-2000 2000 Standard (15 and 20 in. deep)
20-750-XBUS-LLNB-3000 20-750-XBUS-RLNB-3000 3000 Standard (15 and 20 in. deep)
20-750-XBUS-LLBB-1200 20-750-XBUS-RLBB-1200 1200 Bumped Back (20 in. deep)
20-750-XBUS-LLBB-2000 20-750-XBUS-RLBB-2000 2000 Bumped Back (20 in. deep)
20-750-XBUS-LLBB-3000 20-750-XBUS-RLBB-3000 3000 Bumped Back (20 in. deep)
20-750-XSEC-BH-15G (2)
(2) The 15 in. deep transition section can be mounted on the left side or the right side of the PowerFlex 755 drive cabinet.
N/A 15 in. deep transition section N/A