Rockwell Automation 21G PowerFlex 755 Transition Section and Splicing Kit - Manual (Page 17)

Rockwell Automation Publication 750-IN027C-EN-P - November 2013 17
PowerFlex 755 Transition Section and Splicing Kit for Floor-mount Drives and CENTERLINE 2100 Motor Control Centers
Step 5 (Right): Join Drive Cabinet to Left Side of Transition Section
1. Remove panels from the right side of the PowerFlex 755 drive cabinet.
No. Description
➊
Top and bottom rear-wireway panels.
➋
Top and bottom PE bus-bar access panels.
➌
Main horizontal bus-bar access panel.
➊
➊
➋
➋
➌
Cabinet door and internal components
omitted for clarity.