Rockwell Automation 21G PowerFlex 755 Transition Section and Splicing Kit - Manual (Page 18)

18 Rockwell Automation Publication 750-IN027C-EN-P - November 2013
PowerFlex 755 Transition Section and Splicing Kit for Floor-mount Drives and CENTERLINE 2100 Motor Control Centers
2. Align the right transition section with the drive cabinet.
3. Bring the transition section, MCC column, and drive cabinet together.
4. Pass the M6 x 16 mm hex-head thread-forming screws from inside the
drive cabinet through the joining holes and engage the screws with the
➊
holes in the transition section.
➊
➊
➊
➊
➊
➊
➊
➊