Rockwell Automation 21G PowerFlex 755 Transition Section and Splicing Kit - Manual (Page 5)

Rockwell Automation Publication 750-IN027C-EN-P - November 2013 5
PowerFlex 755 Transition Section and Splicing Kit for Floor-mount Drives and CENTERLINE 2100 Motor Control Centers
Preparing the Transition
Section 1. Remove and discard the four shipping plates ➊ .
2. Remove the masking from the ground terminals ➋ .
MCC Columns with Mounting Channels
3. Remove the spacer ➌ on the side of the transition section that will attach to
the MCC column.
MCC Columns without Mounting Channels
3. Remove the mounting channels ➍ from the transition section.
No. Description No. Description
➊
Shipping plates
➌
Spacer
➋
Ground Terminal
➍
Mounting Channels
x 4
x 4
➌
➍
➊
➊
➋