Rockwell Automation 21G PowerFlex 755 Transition Section and Splicing Kit - Manual (Page 9)

Rockwell Automation Publication 750-IN027C-EN-P - November 2013 9
PowerFlex 755 Transition Section and Splicing Kit for Floor-mount Drives and CENTERLINE 2100 Motor Control Centers
Step 4 (Left): Join MCC Column to Left Side of Transition Section
1. Remove the closing plates from the right side of the MCC column.
No. Description
➊
Top and bottom front-wireway closing plates.
➋
Top and bottom rear-wireway closing plates.
➌
Main horizontal bus-bar closing plates.
➊
➋
➊
➋
➌
Unit doors, support pans, and access
covers omitted for clarity.