Rockwell Automation 21G PowerFlex 755 Transition Section and Splicing Kit - Manual (Page 14)

14 Rockwell Automation Publication 750-IN027C-EN-P - November 2013
PowerFlex 755 Transition Section and Splicing Kit for Floor-mount Drives and CENTERLINE 2100 Motor Control Centers
Right-side Kit Assembly Step 3 (Right): Join Transition Section to Left Side of MCC Column
1. Remove the closing plates from the left side of the MCC column.
2. Align the right transition section with the MCC column
No. Description
➊
Top and bottom front-wireway closing plates.
➋
Top and bottom rear-wireway closing plates.
➌
Main horizontal bus-bar closing plates.
➊
➋
➊
➋
➌
Unit doors, support pans, and access
covers omitted for clarity.
➊
➋
➊ ➊
➊
➊
➊
MCC column