Rockwell Automation 1336VT AC DRIVE 5-300AMP (2-160KW) PROGRAMMING MANUAL - Manual (Page 16)

Local and Serial Port Parameters
Firmware Version 1.01-3.01
Chapter 3
3-2
Parameter 1 -- Output Volts
Freq P R
P R
Volts
0
575
0
Read Only
Units
Minimum Value
Maximum Value
Factory Setting
Enter
When this parameter is selected for viewing, the drive output voltage can
be viewed while the drive is running.
Parameter 2 Ċ Output Current
Freq P R
P R Enter % of Rated Output Current
0
200
0
Read Only
Units
Minimum Value
Maximum Value
Factory Setting
When this parameter is selected for viewing, the output current of the drive
as a % of full load output current can be viewed while the drive is running.
Refer to the % Load/Current Conversion Tables in Chapter 7 for quick
conversions.
Important: The displayed output current is an approximate value
calculated from drive internal calculations. Motor characteristics will affect
the accuracy of the output current indication.