Rockwell Automation 1336E IMPACT Adjustable Frequency AC Drive User Manual V 1-4.XX - Manual (Page 64)

4-6 Mounting and Wiring Information Specific to Frames B, C, D, E, F, G, and H
Figure 4.5
Drive Connections for Frame H
Selecting the Proper Lug Kit for
Your System D, E, F, G, and H frame drives have stud type terminals and/or bus
bars/bolts that require standard crimp-type connectors for cable
termination. Connectors such as T & B COLOR-KEYED

Connectors or equivalent are recommended. Table 4.A shows the lug
selection for one possible cable choice. Choose connectors for each
installation based on the desired cable sizes, the application
requirements, and all applicable national, state, and local codes.
R
(L1)
S
(L2)
T
(L3)
380-480V, 522-597 kW (700-800 HP) Terminal Designations
500-600V, 522-597 kW (700-800 HP) Terminal Designations
To Motor
Required
Input Fusing
AC Input Line
W
(M3)
U
(M1)
V
(M2)
H
Frame
Required Branch
Circuit Disconnect
Connect the -DC Brake
to the -Bus to the drive.
Connect the +DC Brake
to the +Bus to the drive.
Connect the DC Brake to the
Link Choke at the bottom of Bay 2.
Front View
1
1
1 User supplied.