Rockwell Automation 999 IMC S Class Compact Motion Controller (Cat. No. 4100-999-122) - Manual (Page 11)

Publication 999-122 - January 1997
Preface P-1
Preface
Read this preface to familiarize yourself with the rest of the manual.
This preface covers the following topics:
•
who should use this manual
•
the purpose of this manual
•
general safety precautions
•
receiving and storage information
•
Allen-Bradley support
Who Should Use this
Manual
Use this manual if you are responsible for designing, installing,
programming, or troubleshooting the Allen-Bradley IMC S Class
Compact.
If you do not have a basic understanding of the Compact, contact your
local Allen-Bradley representative for information on available training
courses before using this product.
Purpose of this Manual
This manual is a installation and setup guide for the Compact. It gives
you an overview of the Compact and describes the procedures you use
to install, set up, use, and troubleshoot the Compact.
Safety Precautions
The following general precautions apply to the Compact:
!
ATTENTION: Only those familiar with the Compact
and associated machinery should plan or implement the
installation, startup, and subsequent maintenance of the
system. Failure to comply can result in personal injury
and/or equipment damage.
ATTENTION: This product contains stored energy
devices. To avoid hazard of electrical shock, verify that
all voltage on the capacitors has been discharged before
attempting to service, repair, or remove this unit. You
should only attempt the procedures in this manual if you
are qualified to do so and familiar with solid-state
control equipment and the safety procedures in
publication NFPA 70E.
ATTENTION: The system integrator is responsible
for local safety and electrical codes.