Rockwell Automation 999 IMC S Class Compact Motion Controller (Cat. No. 4100-999-122) User Manual
Page 15
Publication 999-122 - January 1997
Chapter
1
Safety
Read This Manual
Read and understand this instruction manual. It provides the necessary
information to allow you to install, connect, and set up your IMCñS/23x
for safe, reliable operation.
!
ATTENTION: DANGEROUS MACHINERY!
Operation and maintenance of automatic equipment
involves potential hazards. Control Operators, Setup
Personnel, and Programmers should each take
precautions to avoid injury.
Injury and entanglement may occur if hands and limbs
come in contact with moving machinery. KEEP HANDS
CLEAR of dangerous moving machinery. Loose fitting
clothing or ties can become entangled in the machinery.
These items should not be worn while operating,
servicing, or programming the machine.
!
ATTENTION: HIGH VOLTAGES!
Electric shock can kill. Be sure the controller is safely
installed in accordance with the Installation and
Hookup Section of this manual. Avoid contact with
electrical wires and cabling while power is on. The
electrical cabinet should be opened only by trained
service personnel.
!
ATTENTION: STATIC CONTROL!
The internal modules of the IMC S Class Compact motion
controller contain staticñsensitive electronic
components. Remove and handle the internal modules
only at a staticñsafeguarded work area. Failure to do so
may result in a drastically shortened life of your motion
controller.
A disposable wristñstrap for grounding yourself is
included with this product. Please follow the directions
for use of this strap when removing and handling the
motion controllers internal modules.