Preventing electrostatic discharge – Rockwell Automation 1756-M02AE Analog Encoder (AE) Servo Module Installation Instructions User Manual
Page 2
Advertising
2 Analog Encoder (AE) Servo Module
Publication 1756-IN047D-EN-P - March 2001
Preventing Electrostatic Discharge
WARNING
!
Electrostatic discharge can damage the servo board if
you touch the circuitry or connector pins without taking
precautions. Follow these guidelines when you handle
the servo board:
• Touch a grounded object to discharge potential
static.
• Wear an approved grounding wrist strap.
• Do not touch the connector or connector pins on
the servo board.
• Do not touch circuit components inside the servo
board.
• If available, use a static-safe work station.
Advertising