Rockwell Automation 1756-M02AE Analog Encoder (AE) Servo Module Installation Instructions - Manual (Page 31)

Analog Encoder (AE) Servo Module 31
Publication 1756-IN047D-EN-P - March 2001
Removing the Module from the Chassis
To remove the module from the chassis:
1. If the RTB is on the module, unlock the RTB and remove it. For
more information, refer to Removing the Removable Terminal Block from the
Module.
2. Push in and hold the top and bottom locking tabs on the module.
Figure 25 Hold Locking Tabs
3. Pull the module out of the chassis.
POWER