Rockwell Automation 1784-PCD DeviceNet Communication Card - Manual (Page 25)

Install and Use the 16- and 32-bit Drivers for Windows 95 3-3
Publication 1784-IN029C-EN-P - June 2001
•
When changing the series of the PCD card in Windows 95:
If you change the series of the PCD card, when the PC recognizes the new
PCD card for the first time, Windows reports that it has found new hardware
and may prompt you to insert the appropriate setup disk. If prompted, insert
the setup disk with the driver for your application. Be certain to install the
same type of driver (16- or 32-bit) for both cards. You will need to reboot
your PC after you install the card.
TIP
These drivers will work with the series A, B, and C PCD
cards. The series A, B, and C PCD cards use the same
setup disks.