Install the driver in windows 98 – Rockwell Automation 1784-PCD DeviceNet Communication Card User Manual
Page 33
Install and Use the 32-bit Driver for Windows 98/Me 4-3
Publication 1784-IN029C-EN-P - June 2001
Install the Driver in Windows 98
1. Insert the 1784-PCD Installation Windows 95/98/2000/Me 32-bit Setup Disk
into your floppy disk drive.
a. Some earlier versions of the driver do not appear in the Add/Remove
Programs utility on the Windows Control Panel and can only be removed
by running the pcdupdt.exe program. To verify that an earlier version of
the driver is not installed, run the pcdupdt.exe program from the root of
the 1784-PCD Installation Windows 95/98/2000/Me 32-bit Setup Disk.
b. Browse to x:\pcdupdt.exe where x: is your floppy disk drive letter.
c. Double-click on the pcdupdt.exe file to run it.
2. Insert the PCD card into your system as described in Chapter 7. Windows 98
displays this screen.
3. Click Next.