Rockwell Automation 1784-PCD DeviceNet Communication Card - Manual (Page 72)

9-2 Run the 1784-PCD Test Utility and Access Diagnostics
Publication 1784-IN029C-EN-P - June 2001
Run the PCD Test Utility
1. Navigate to the location of the PCD Test Utility, for example,
A:\PCD_TEST\pcd_test.exe.
2. Double-click on the pcd_test.exe file to start the PCD Test Utility.
The 1784-PCD Installation Test Utility automatically looks for your card and
begins the tests. As the tests are completed, a green check mark appears,
showing that the particular test was successful. If there is an error, you will
see a red X and an explanation.