Rockwell Automation 1784-PCD DeviceNet Communication Card - Manual (Page 85)

Troubleshoot the Card 10-5
Publication 1784-IN029C-EN-P - June 2001
7. In the Properties dialog box, click on the Resources tab.
8. Do the following:
•
check for conflicts listed in the Conflicting Device list
•
verify that you have assigned resources to the PCD card. You should
have, at minimum, an interrupt and memory range assigned.
TIP
Be aware that:
•
series A 1784-PCD cards do not use an Input/Output
range
•
you may have to disable a device to make an interrupt
available