Rockwell Automation 1784-PCD DeviceNet Communication Card - Manual (Page 30)

3-8 Install and Use the 16- and 32-bit Drivers for Windows 95
Publication 1784-IN029C-EN-P - June 2001
Remove the Driver
You can use the uninstaller provided by Windows 95 to remove the driver from
your system.
1. Stop the PCD card as directed above.
2. Click Start
⇒
Settings
⇒
Control Panel.
3. Double-click the Add/Remove Programs icon.
4. Select Allen-Bradley 1784-PCD.
5. Click Add/Remove. Click Next.
6. Before files are deleted, you are prompted to confirm that you want to
remove the PCD card.
TIP
As an alternative, you can remove the driver by running
the pcdupdt.exe program from the root of the 1784-PCD
Installation Windows 95/98/Me 32-bit Setup Disk.
a. Place the 1784-PCD Installation Windows
95/98/2000/Me 32-bit Setup Disk into your
computer’s floppy disk drive.
b. Browse to x:\pcdupdt.exe where x: is your
floppy disk drive letter.
c. Double-click on the pcdupdt.exe file to run it.