Rockwell Automation 1784-PCD DeviceNet Communication Card - Manual (Page 48)

5-6 Install and Use the Driver for Windows NT
Publication 1784-IN029C-EN-P - June 2001
5. Insert the 1784-PCD Installation Windows NT 4.0 Setup Disk into the floppy
disk drive.
6. Access the Run window by selecting Start
⇒
Run.
7. In the Run dialog box, type the path
a:\setup.exe
Substitute for a:\ the drive letter of your floppy disk, (for example, b:\).
If you see this screen: Do this:
Click Done. If you do not, you will see this
screen every time you reboot your pc.
Click OK.
Click No.