Rockwell Automation 1784-PCD DeviceNet Communication Card - Manual (Page 55)

Install and Use the Driver for Windows 2000 6-5
Publication 1784-IN029C-EN-P - June 2001
5. Select Search for a suitable driver and click Next.
At this point you need to select where the file is located.
6. Select one of the following:
•
Floppy disk drives if you are going to use the floppy disk that
ships with the 1784-PCD card
•
CD-ROM drives if you are going to get the file from the RSLinx
CD-ROM, Version 2.2 Service Pack 2 or later.
•
Specify a location if you downloaded the driver file from
www.ab.com/support/products/pccards.html.
If you select: Then:
Floppy disk drives insert the 1784-PCD Installation Windows
95/98/2000/Me 32-bit Setup Disk into the drive and
click Next. Windows 2000 will search for the
appropriate driver.
CD-ROM drives insert the RSLinx CD into the drive and click Next.
Windows 2000 will search for the appropriate driver.
Specify a location use this selection if you have downloaded the driver
from www.ab.com/support/products/pccards.html. You
will be prompted for the location path of the driver.