Rockwell Automation 1771-TCM TEMPERATURE CONTROL - Manual (Page 15)

2–2 Installing the Software
Publication 1771Ć6.4.5 - January 1997
The Temperature Control configuration software includes three sets
of disks:
This set: Installs:
1 (3 disks) The configuration software itself
2 (2 disks) Win32s software (Windows 3.1 or 3.11 only)
3 (2 disks) INTERCHANGE software
Getting help while installing TemperatureControl software
•
Press
F1 to display installation help.
•
Click on
Cancel to abort the installation. You can run the
installation setup a second time to complete an aborted
installation (see page 2–2).
•
If a serious error occurs during the installation, view the text file
INSTALL.LOG in your root directory. This file may help you
figure out what the problem is.
Convention
These instructions assume the 3
½-inch disk is to be inserted into
drive a: of your computer. If drive a: is not used, replace the a: in
these instructions with the appropriate drive designation.
To install the TemperatureControl configuration software, follow
these steps:
1. In the Windows Program Manager, from the
File pull-down menu,
select
Run.
The Run dialog box appears.
Preparation for Installing
the Software
"
STOP
Installation Procedure