Rockwell Automation 1771-TCM TEMPERATURE CONTROL - Manual (Page 48)

5–13 Configuring the Loops
Publication 1771Ć6.4.5 - January 1997
You can enter descriptive information for each loop. This can
include any information you wish to associate with the loop, such as
physical location, product being manufactured, etc. You can view
this information at any time; it is also included in the printed reports.
To enter or view the loop description:
1. At the Module Manager screen, select a loop.
2. From the
Loop menu, select Description...
The Loop Description screen appears for the loop you selected.
3. Enter or edit the description for the loop and click on
OK.
To learn how to tune the loops, read chapter 6.
Loop Description
What to do next