Rockwell Automation 1771-TCM TEMPERATURE CONTROL - Manual (Page 45)

5–10 Configuring the Loops
Publication 1771Ć6.4.5 - January 1997
Once you have entered the appropriate values at the Configuration
screen, you must download these parameter values. To do so:
1. From the
Loop pull-down menu, select Download.
Accessing the Download function
You may also access the Download function by pressing CTRL + D.
The Download dialog box appears.
If you choose: Then:
Download to PLC the configuration values are downloaded to the PLC
data table block. From there, the ladder logic
blockĆtransfers them to the TCM module.
Save to the disk file the configuration values are downloaded to the disk
file, from where they can be uploaded as needed.
2. Select either or both and click on
OK.
To configure the loop, choose
download to the PLC.
At this point the Download dialog box is removed from the
Configuration screen, and the module configuration is complete.
Downloading
Configuration Values
"