Rockwell Automation 1771-TCM TEMPERATURE CONTROL - Manual (Page 46)

5–11 Configuring the Loops
Publication 1771Ć6.4.5 - January 1997
In the case that you are reconfiguring a loop or group of loops, you
may find it useful to first upload the old configuration values for that
module. Also, after downloading, you’ll want to verify that the PLC
processor received the correct information. To do so, at the
Loop
pull-down menu, select
Upload.
1. From the
Loop pull-down menu, select Upload.
Accessing the Upload function
You may also access the Upload function by pressing
CTRL + U.
The Upload dialog box appears.
2. Select your desired upload source and click on
OK.
Uploading Configuration
Values
"